Häfele 819.50.810, Инструкция по монтажу

Страница: 39 / 52

732.28.920
HDE 17.03.21
39/52
8.1.22.
Assembly of the outer stair stringer: The tip of
the outer stair stringer must be placed diagonally
mirrored to the inner stair stringer, i.e. the tip of the
outer stair stringer points in the opposite direction
to the tip of the inner stair stringer. Lift the outer
stair stringer in pairs and first press the outer and
the central step into the corresponding stair stringer
forks.
Into the last fork of the outer stair stringer no
step gets inserted (in the picture on the right).
8.1.23.
Then connect the remaining steps with the outer
stair stringer so that all steps are seated between
the stair stringer forks.
In order to be able to insert the axis screws in the
next step, the drill holes of the stair stringer forks
must be in alignment with the drill holes of the step.
To achieve this, the surface of the stair stringer
forks must be flush with the surface of the step.
If the step protrudes over the stair stringer, the
stais stringer components must be moved slightly
upwards
8.1.24.
Insert the axis screws and screw the steps and
stair stringer elements together using an allen key
attachment (tightening torque 2Nm).
To screw in the axis screw, the drill holes
of the stair stringer elements and step
must be in alignment. If necessary, you
can find the exact position by moving the
stair stringer forks slightly towards the
step.
en