732.28.920
HDE 17.03.21
47/52
8.2.13.
Installation of the pot magnets:
Drill two approx.
15mm deep holes
with a dia-
meter of
5.5mm
on the inside of the outer stringer
at roughly equal intervals (e.g. stringer section of
stages 3 and 8). If you do not have a 5.mm drill,
you can alternatively use an 8 mm drill and then
insert one of the additional expansion sleeves into
the drill hole.
Screw in the pot magnets.
Mounting the magnetic screw:
Position the magnetic screws on the center of the
magnets. Fold in the stairs and transfer the position
of the tip of the magnetic screws to the wall.
Depending on the properties of the wall, pre-drill
the mounting hole at the marked position.
Stone or concrete walls
: Insert a dowel that mat-
ches the magnetic screw.
Then screw in the magnetic screw so that it is flush.
en
Содержание 819.50.810
