HDE 24.
01.
201
2
Ma
ß
e
in
mm – Dimensions in mm
–
Dime
n
sions en
mm
– Medi
das
en
mm
- Misure
in
mm
C
at.
N
o. 732
.2
9.1
3
5
15
8. Operation
8.1 Operation
(latch
bolt
lock operation)
• Latch bolt lock operation = factory setting.
• An authorised user key is required for the operation.
8.2 Operation
(dead
bolt
lock operation)
• An authorised user key is required for the operation.
• The dead bolt lock operation is set according to chapter „
9. Changing the parameters
“
9. Changing the parameters
The special keys required for changing the parameters are not included in the scope of delivery
and must be ordered separately. Contact the manufacturer for ordering.
9.1 Setting the open time
The special key „Open Time #74“ must be ordered to set the opening period
9.2 Setting the output
delay
The special key „Output Delay #81“ must be ordered to set the delay period.
9.3 Activating the dead
bolt lock operation
The jumper must be removed on connections 3 and 4 of the FT 120 to activate the dead bolt
lock operation and a simple reset must be performed.
9.4 Activating
the
latchbolt-lock
operation
The jumper must be reset on connections 3 and 4 of the FT 120 to activate the latch bolt lock
operation and a simple reset must be performed.
For step-by-step instructions „
Operation (latch bolt lock operation)
“
see illustrations starting on page
49
.
For step-by-step instructions „
Operation (dead bolt lock operation)
“
see illustrations starting on page
50
.
For step-by-step instructions „
Setting the opening period
“ see illustrations
starting on page
51
.
For step-by-step instructions „
Setting the delay period
“ see illustrations
starting on page
52
.
For step-by-step instructions „
Activating the dead bolt lock operation
“
see illustrations starting on page
53
.
For step-by-step instructions „
Activating the latch bolt lock operation
“
see illustrations starting on page
54
.
BA_DFT.book Seite 15 Dienstag, 24. Januar 2012 10:37 10
