Haes SZAOV, Инструкция по установке, пусконаладке и эксплуатации, Страница: 4 / 45

Single Zone AOV User Manual SAFETY
4
Approved Document Ref: UI-SZAOV-01 Issue 2.01
SAFETY
IMPORTANT NOTICE
PLEASE READ THIS MANUAL CAREFULLY BEFORE HANDLING THE EQUIPMENT AND
OBSERVE ALL ADVICE GIVEN WITHIN IT.
THIS PARTICULARLY APPLIES TO THE PRECAUTIONS NECESSARY TO AVOID
ELECTRO-STATIC DISCHARGE
Important Safety Notes
The panel is safe to operate provided it has been installed in compliance with the
manufacturer’s instructions and used in accordance with this manual.
Hazardous voltages are present inside the panel
—DO NOT open it unless you are qualified
and authorised to do so. There is no need to open the panel’s enclosure except to carry out
commissioning, maintenance and remedial work. This work must only be carried out by
competent service personnel who are fully conversant with the contents of the panel’s
installation manual and have the necessary skills for maintaining this equipment.
The product must be installed, commissioned and maintained for operation in accordance
with the instructions and the applicable wiring codes of practice and national standard
regulations for fire systems appropriate to the country and location of the installation.
This equipment is designed to be operated from 230VAC 50/60 Hz mains supplies and is of
Class I construction. As such it must be connected to a protective earthing conductor in the
fixed wiring of the installation. Failure to ensure that all conductive accessible parts of this
equipment are adequately bonded to the protective earth will render the equipment unsafe.
Disclaimer
No responsibility can be accepted by the manufacturer or distributors of this fire alarm panel
for any misinterpretation of an instruction or guidance note or for the compliance of the
system as a
whole. The manufacturer’s policy is one of continuous improvement and we
reserve the right to make changes to product specifications at our discretion and without
prior notice. E & O E.
Warnings
Before installation, refer to the Ratings shown on the label inside the product
and to the ‘Specifications Chart’ in this document. If you are unclear on any
point, please DO NOT proceed. Contact the manufacturer or supplier for
clarification and guidance.
Only Trained service personnel should undertake the Installation,
Programming and Maintenance of this equipment.
!