Haes SZAOV, Инструкция по установке, пусконаладке и эксплуатации, Страница: 36 / 45

Single Zone AOV User Manual PANEL CONTROLS & INDICATIONS
36
Approved Document Ref: UI-SZAOV-01 Issue 2.01
PANEL CONTROLS & INDICATIONS
Panel Display
OPERATING
Activate Controls
In normal standby mode the keypad controls are inactive to protect from unauthorised
operation. Controls can be activated by using the ‘Activate Controls’ key switch or by
entering a four-digit code using the keypad.
The use of a code entry to activate the controls is enabled by default but can be disabled in
the engineering functions.
To activate the controls using the key switch;
turn the key clockwise to the ‘On’ position.
The ‘Access Level’ indicator LED will light and all buttons on the keypad will now be
operational. To deactivate the controls, turn the key back to the ‘Off’ position and the ‘Access
Level’ indicator LED will extinguish.
If the key switch is in the ‘On’ position the keypad will remain active.
NOTE:
It is not possible to remove the key in the ‘On’ position.
To activate the controls using the keypad; enter the four-digit code using buttons 1 - 4.
The factory default code is 1-2-3-4 but can be changed in the engineering functions. After
entering the four-
digit code press the ‘ENTER’ button. The ‘Access Level’ indicator LED will
light and all buttons on the keypad will now be operational.
After activation by code entry, controls will automatically deactivate again after 2 minutes
and the panel will return to standby mode.
The test lamps and mute buzzer functions are operational without the need to activate
controls.
Vent Control System
OPEN
VENT
CLOSE
VENT
RESET
ENTER
1 2 3 4
Vent Open
Input Detector
Vent Closed
Supply Healthy
General Alarm
General Fault
General Disablement
Test Mode
Rain Status
PIR Status
Power Supply Fault
System Fault
Access Level