HAEHNE
Elektronische Messgeräte GmbH · Heinrich-Hertz-Str. 29 · D-40699 Erkrath Germany · Telefon 0211/9 25 91-0 · Fax 0211/9 25 91-20
http://www.haehne.de
Email: [email protected]
Block
Channel 1...8
Number
Level
Block 9 37
Range:
0.000…2.000
Standard: 1.000
The values of the signal source are multiplied by the factor
3 9 x I 2
Factor
The parameters of output mode (49x11), the peak value storage (49x21 to 49x23) and the
switching function (49x31 to 49x34) are described in the Reference Manual
Range:
-12.00…0.00
Designation in V
Standard: -10.00
Minimal output voltage
The corresponding current output is unaffected from this
and limited to 4 (0) mA.
Example: Limitation to 0 V
-
if the connected input is not suitable for negative voltage
- if by definition as controller output, the connected motor
should not turn in reverse.
3 9 x I 4
Lower voltage
limitation
Range:
0.00…12.00
Designation in V
Standard: 10.00
Maximum output voltage
The corresponding current output is equivalent
(10 V corresponds to 20 mA)
Example: Limitation to 10 V
when the downstream input cannot accept a higher voltag
e.
3 9 x I 3
Upper voltage
limitation
