11
07
08
09
10
Take the motor from the previous stage. Fit the shaft
of the motor into the recess in cog
37-10
, so that the
tabs on the motor fit over the raised screw sockets.
Fix the motor in place with two
PB 1.7 x 6 mm
screws
(supplied with stage 36).
Take the base plate
37-05
and fit it over the cogs.
Fix in place with three
PB 2 x 5 mm
screws so that
the cogs are held in place.
Check the fit of the foretop command post attachment
37-06
on the back of the foretop command post part
37-04
, as shown. Apply a little superglue to the two
pins on part
37-06
and fix in place.
Completed work
We have started to assemble the radar unit, and the
motor has been fitted.
Check the fit of the radar unit
37-02
on the base
37-03
. Apply a little superglue to the contact points
and fix in place.
Turn the assembly over and take the base of the
radar unit
37-03
. Fit it onto the protruding shaft of
cog
37-08
and fix in place with a
PB 1.7 x 4 mm
screw.
37-04
PB
PB
37-05
FP
36-01
37-03
37-02
37-04
37-05
PB
PB
37-06
17
17
AGORA
MODELS
PB
AGORA
MODELS
