Hach TU5400 sc, Основное руководство пользователя

Страница: 3 / 266

Table of Contents
1 Additional information on page 3
2 Specifications on page 3
3 General information on page 5
4 Installation on page 10
5 User navigation on page 21
6 Operation on page 21
7 Calibration on page 21
8 Verification on page 21
9 Maintenance on page 22
10 Troubleshooting on page 29
Section 1 Additional information
An expanded user manual is available on the manufacturer's website. Videos on how to install,
operate and do maintenance and troubleshooting on the TU5300 sc and the TU5400 sc turbidimeters
are available on the
TU5 Series Turbidimeters playlist at
http://www.youtube.com/user/hachcompany .
Section 2 Specifications
Specifications are subject to change without notice.
Specification Details
Measurement method Nephelometry with scattered light collected at a 90-degree angle to the incident light
and 360 degrees around the sample vial
Primary compliance
method EPA approved Hach Method 10258
1
Enclosure Material: ASA Luran S 777K / RAL7000, TPE RESIN Elastocon
®
STK40,
Thermoplastic Elastomer TPS-SEBS (60 Shore) and stainless steel
IP rating Electronic compartment IP55; process head/Automatic Cleaning Module attached to
the instrument and all of the other functional units IP65
2
Dimensions (W x D x H) 268 x 249 x 190 mm (10.6 x 9.8 x 7.5 in.)
Weight Instrument with the process head: 2.7 kg (6.0 lb); Instrument with the optional
automatic cleaning module: 5.0 kg (11.0 lb)
Power requirements 12 VDC, 14 VA supplied by the SC controller
Protection class III
Pollution degree 2
Installation category II
Mounting Indoor on a wall
Operating temperature 0 to 50 °C (32 to 122 °F)
Storage temperature –40 to 60 °C (–40 to 140 °F)
Humidity 5 to 95% relative humidity, non-condensing
Sensor cable length TU5x00 sc without Automatic Cleaning Module or flow sensor: 50 m (164 ft);
TU5x00 sc with Automatic Cleaning Module: 10 m (33 ft)
Laser Class 2 laser product: Contains a non user-serviceable class 2 laser.
Optical light source 650 nm, maximum 0.43 mW
Fittings Sample inlet and outlet: ¼-in. OD tubing (optional tubing adapter, ¼ in. to 6 mm)
1
http://www.hach.com
2
Water drops, puddles or runlets that will not damage the instrument may be in the inner of the
enclosure.
English 3