Hach Polymetron 9582sc Скачать руководство пользователя страница 7

Products marked with this symbol indicates that the product contains toxic or hazardous substances
or elements. The number inside the symbol indicates the environmental protection use period in
years.

Products marked with this symbol indicates that the product conforms to relevant South Korean
EMC standards.

3.1.3 EMC compliance statement (Korea)

Type of equipment

Additional information

 

기기

업무용

 

방송통신기자재

 )

 

기기는

 

업무용

 (A 

 ) 

전자파적합기기로서

 

판매자

 

 

사용자는

 

 

점을

 

주의하시기

 

바라며

가정외의

 

지역

에서

 

사용하는

 

것을

 

목적으로

 

합니다

.

Class A equipment
(Industrial Broadcasting and Communication
Equipment)

This equipment meets Industrial (Class A) EMC
requirements. This equipment is for use in industrial
environments only.

3.2 Product overview

This single-channel analyzer is used for the measurement of dissolved oxygen in boiler feedwaters,
economizers, condensers and in general all thermal equipment using water as a heat transfer liquid.

3.3 Product components

Make sure that all components have been received. If any items are missing or damaged, contact the
manufacturer or a sales representative immediately.
Components:

• Controller (contains instructions for controller installation and operation)
• Sensor (contains instructions for sensor installation and operation)
• Sensor cable
• Flow chamber
• Sensor maintenance kit (contains membranes and electrolyte)

Section 4 Installation

C A U T I O N

 

Multiple hazards. Only qualified personnel must conduct the tasks described in this section of the
document.

4.1 Installation guidelines

• Put the instrument in a location that has access for operation, service and calibration.
• Make sure that there is good view of the display and controls.
• Keep the instrument away from a heat source.
• Keep the instrument away from vibrations.
• Keep the sample tubing as short as possible to minimize the response time.
• Make sure that there is no air in the sample supply line.

English

   

5

Содержание Polymetron 9582sc





























Отзывы: