Hach ANATEL PAT700, Руководство оператора

Страница: 97 / 158

WG
M - 2
8
No
vemb
e
r 20
07
- Ed
it
io
n 0
1
PAT700 Total Organic Carbon Analyzer – Bottle Mode Page 87
Anatel
Operator Manual
14) If the selection has been made to use the conductivity meter verification resistor,
install the resistor onto the analyzer’s 9-pin printer/calibration port, as illustrated in
Figure 6-14 .
• If the calibration is being performed on a schedule, the conductivity meter test
dialog box does not appear, and the calibration occurs automatically.
• Otherwise, the conductivity meter test dialog box appears when the analyzer
passes the conductivity meter test. See
Figure 6-15 .
Figure 6-14 Verification resistor installed on printer/calibration port
Figure 6-15 Conductivity meter test dialog box
Verification resistor