Hach Ultra ORBISPHERE 510, Руководство оператора

Страница: 15 / 144

Orbisphere 510/511/512 Analyzers - Manual Overview 9 of 138
Operator Manual
ORBISPHERE
Intended Use of this Equipment
This high accuracy Orbisphere instrument is designed for gas measurement using
electrochemical (EC) or thermal conductivity (TC) sensors. The instrument can be used
for process and laboratory analysis, in applications such as beverage, life sciences,
power generation, and the electronics industry.
Orbisphere 51x analyzers are available as portable, wall or pipe mount, and rack mount
versions. According to the configuration, the Orbisphere 51x has provision for up to three
patented gas phase (or dissolved gas) Orbisphere electrochemical and/or thermal
conductivity sensors.
Note:
A Normal or Smart EC Sensor can be connected to the measurement board. A Smart
Sensor is a sensor with a non-volatile memory which allows storage of parameters
(calibration coefficient, dates, etc.). When a Smart Sensor is connected, these
parameters are read by the instrument software. The sensor can be calibrated in the lab
and installed on site afterwards.
Precautionary Labels
Read all labels and tags attached to the instrument. Personal injury or damage to the
instrument could occur if not observed.
This symbol, when noted on a product enclosure or barrier, indicates that a risk of
electrical shock and/or electrocution exists and indicates that only individuals
qualified to work with hazardous voltages should open the enclosure or remove
the barrier.
This symbol, when noted on the product, indicates that the marked item can be hot
and should not be touched without care.
This symbol, when noted on the product, indicates the presence of devices
sensitive to electrostatic discharge and indicates that care must be taken to
prevent damage to them.
This symbol, when noted on the product, identifies a risk of chemical harm and
indicates that only individuals qualified and trained to work with chemicals should
handle chemicals or perform maintenance on chemical delivery systems
associated with the equipment.
This symbol, if noted on the product, indicates the need for protective eye wear.
This symbol, when noted on the product, identifies the location of the connection
for protective earth (ground).
Electrical equipment marked with this symbol may not be disposed of in European
public disposal systems. In conformity with European local and national
regulations, European electrical equipment users must now return old or
end-of-life equipment to the manufacturer for disposal at no charge to the user.
Products marked with this symbol indicates that the product contains toxic or
hazardous substances or elements. The number inside the symbol indicates the
environmental protection use period in years.