Habasit PMR-06 Скачать руководство пользователя страница 38

Страница: 38 / 117

Habasit Italiana S.p.A.
Vittorio Veneto 31029 (TV)
Tel.: ++39(0)438.9113

Regulating Unit PMR-06

Fax. ++39(0)438.200545

Author:

S.D.T. / KM

INSTALLATION

Editon: 12/2005

Page

C-7

Replaces: 05/2005

C.5

STORAGE

IMPORTANT

The regulating unit must be stored in a dry room free from seepage of liquids.

NOTE

Never, on any account, store the regulating unit out of doors! As a general rule, observe the

following environmental conditions.

ABLE

TORAGE CONDITIONS

ENVIRONMENTAL CONDITIONS FOR STORAGE

Min/Max ambient

temperature of storage

In the range of +5 °C to +40 °C

Relative humidity of

place of storage

In the range of 50% to 70%

If the regulating unit, its accessories and spares have to remain in storage for a
prolonged period, they must be protected from dust and damp.

We recommend the following:

Clean the regulating unit in general.
Apply PROTECTIVE SILICONE OIL to

-painted or

-treated parts.

Cover the regulating unit with a sheet to protect it from dust.
Before being oiled or greased for good preservation, some parts can, if necessary, be
cleaned with a specific, rust-proofing detergent.

Regulating Unit PMR-06

Содержание PMR-06






















































































































Результаты поиска

Содержание PMR-06

Отзывы:

Похожие инструкции для PMR-06

Бренды по названию

Популярные бренды

Habasit PMR-06, Общее руководство по использованию и техническому обслуживанию

Результаты поиска

Содержание PMR-06

Отзывы:

Похожие инструкции для PMR-06

Бренды по названию

Популярные бренды