Haas Door 610, Руководство по эксплуатации и техническому обслуживанию

Страница: 8 / 14

Haas Door Commercial Instruction Manual
Rev. 7/15 © 2015 Haas Door Company 3
INSTALLATION OF VERTICAL TRACKS
STEP 3
Position bottom section in center of the opening, allowing equal distance from each side of the opening.
STEP 4
Position left hand track over rollers as shown in Figure 4. Space track 1/2” from door as shown.
Before attaching vertical track angle or brackets to jambs it must be plumb and parallel to door and raised to match leveling of
bottom door section.
Attach vertical track angles to jambs by welding or by using 1/4” self drilling screws on steel jambs or 5/16" x 1 1/ 2” hex
head lag screws on wood jambs. If mounting directly to masonry, anchors are not supplied.
Repeat above step for right hand track. (Note: Both tracks must be parallel for proper operation)
Insert rollers into end hinges.
Hook rollers into vertical track and swing end
hinges onto door section as shown at left.
Secure with fasteners provided.
STEP 5
Place #2 section on top of bottom section. Note: if door is supplied with cylinder lock, use section with lock holes punched
or drilled in it (see Step 19 on page 8).
Attach hinges and rollers as shown in Figure 5. See hinge schedule Figure 6 on page 4 for correct placement of numbered
hinges. If inside lock is supplied, see Figure 7.