manualshive.com logo in svg

Haag-Streit BX 900, Инструкция по эксплуатации, Страница: 6 / 28

Поделиться
Скачать
Haag-Streit BX 900 Скачать руководство пользователя страница 6

6

DEUTSCH

ENGLISH 

FRANÇAIS

ITALIANO

ESPAÑOL

NEDERLANDS

PORTUGUÊS

SVENSKA

© HAAG‑STREIT AG, 3098 Koeniz, Switzerland ‑ HS‑Doc. no. 1500.7220449‑04090 – 2021 – 08

respective diagnosis. Children, aphakes and people suffering from

eye conditions are most at risk.

• An increased risk may also occur if the retina is exposed to the

same or a similar device with a visible light source within 24 hours.

This specially applies if the retina has been photographed with a

flashbulb in advance.

• When the flash illumination is used, the emission exceeds the Group

2 limit of parameter “weighted retinal visible and infrared thermal

radiance, L

VIR-R“

as specified by EN ISO 15004-2: 2007 but does

not exceed the limit “retinal thermal” as specified by ICNIRP 2013.

Since this retinal exposure limit is not exceeded in case of normal

operation, the device can be regarded as safe for the patient’s eye

when operated within the limits specified by Haag-Streit.

1.7 Disinfection

NOTE!

The device can, but does not need to be disinfected. For more

information, please refer to the 'Maintenance' chapter.

1.8 Warranty and product liability

• Haag-Streit products must be used only for the purposes and in the manner

described in the documents distributed with the product.

• The product must be treated as described in the ‘Safety’ chapter. Improper

handling can damage the product. This would void all guarantee claims.

• Continued use of a product damaged by incorrect handling may lead to personal

injury. In such a case, the manufacturer will not accept any liability.

• Haag-Streit does not grant any warranties, either expressed or implied, including

implied warranties of merchantability or fitness for a particular use.

• Haag-Streit expressly disclaims liability for incidental or consequential damage

resulting from the use of the product.

• This product is covered by a limited warranty granted by your seller.

• For USA only: This product is covered by a limited warranty, which may be

reviewed at www.haag-streit-usa.com.

1.9 Reporting obligation

NOTE!

Any serious incident that has occurred in relation to the device must be

reported to Haag-Streit and the competent authority of the Member

State in your country.

Содержание BX 900





























Отзывы:

Нет отзывов