manualshive.com logo in svg

Haag-Streit BX 900, Инструкция по эксплуатации, Страница: 11 / 28

Поделиться
Скачать
Haag-Streit BX 900 Скачать руководство пользователя страница 11

11

DEUTSCH

ENGLISH 

FRANÇAIS

ITALIANO

ESPAÑOL

NEDERLANDS

PORTUGUÊS

SVENSKA

DEUTSCH

ENGLISH

FRANÇAIS

ITALIANO

ESPAÑOL

NEDERLANDS

PORTUGUÊS

SVENSKA

© HAAG‑STREIT AG, 3098 Koeniz, Switzerland ‑ HS‑Doc. no. 1500.7220449‑04090 – 2021 – 08

3.3 Lens barrel

Lens barrel for 35mm photography (38). Image taken by the right beam path of the

microscope. Object image size: see Table b, chapter 'Mirror and diaphragm

component'.

3.4 Camera housing

Not every camera housing (39) can be connected. Haag-Streit selects suitable

camera models and makes the necessary adjustments. The photo slit lamp is only

guaranteed to function properly if cameras recommended by Haag-Streit are used.

Please consult your local partner for information on the supported cameras.

3.5 Flash unit FU 01

WARNING!

This device must only be operated by qualified and trained personnel.

Face plate

45. Flash intensity high with LED

46. Symbols with LED (See chapter “Error

messages flash unit”)

47. Flash test (In order to test the flash, press

the release button (44) or the test button

(47).)

48. Flash intensity

49. Flash intensity normal

50. Main switch ON (lights up) / OFF

3.6 LED illumination

• The LED illumination head is made up of an LED illumination unit, a power

supply, an optical light guide set for background illumination and an illumination

control.

• The two-core connection cable between the power supply and illumination head

transmits both the supply current for the LED as well as signals for

communication between the power supply and illumination.

• The light intensity of the slit and background illumination can be regulated

continuously (without increments) using the illumination controllers. These can

be connected using a longer connection cable on the PS-LED power supply.

3.7 Overview of the LED illumination unit upper part

51. LED illumination LI 01-plus with background illumination

52. Flash tube connection

53. Flash tube

54. Filter wheel for constant illumination (LED) blue filter

55. Optical light guide connection for slit and background illumination

56. Filter/diaphragm wheel for background illumination (flash). This wheel is used

to control the intensity of the flash background illumination and blue filter; see

5.4

3.8 Blue filter

The rotating wheel (54) is used to pivot the blue filter. Marking points at the same

height = blue filter is on.

3.9 Shutter

57. The shutter cable must be connected to the illumination head. This ensures

that a shutter closes when the flash is triggered, in order to protect the LED

from the intense radiation of the flash.

Содержание BX 900





























Отзывы:

Нет отзывов