manualshive.com logo in svg

Haag-Streit BX 900, Инструкция по эксплуатации, Страница: 20 / 28

Поделиться
Скачать
Haag-Streit BX 900 Скачать руководство пользователя страница 20

20

DEUTSCH

ENGLISH 

FRANÇAIS

ITALIANO

ESPAÑOL

NEDERLANDS

PORTUGUÊS

SVENSKA

© HAAG‑STREIT AG, 3098 Koeniz, Switzerland ‑ HS‑Doc. no. 1500.7220449‑04090 – 2021 – 08

9.2 Changing the flash tube

WARNING!

• After turning off the FU 01 flash unit,

wait at least 15 seconds before

opening the slide!

• Do not touch the glass body of the

flash tube.

96. Coupling slide

97. Protective plug

98. Flash tube

• Slide the coupling slide upwards.

• If the split lamp is new, remove the protective

plug from the flash tube housing.

• Remove the defective flash tube.

• Insert the tube without touching the glass.

• Slide the coupling slide back downward until it

stops in place.

NOTE!

Only original Haag-Streit flash tubes may be used.

9.3 Servicing

To guarantee a long service life, the device must be cleaned weekly as described

and protected with the dust cover when not in use. We recommend having the

device inspected once a year by an authorized service technician.

9.4 Replacing the fuses

WARNING!

• The mains cable must be disconnected from the mains before the

cover is screwed on.

• Only fuses of the type indicated in the technical data may be used.

• Remove the cover (99) by loosening the two screws (100).

9.4.1 Mains fuses:

• Remove the mains plug (102), remove the fuse holder (103) and replace the

fuses (fuse type according to the technical data).

• Insert fuse holder (103) and attach mains plug (102).

9.4.2 Flash unit fuse:

• Remove the mains plug (102), remove the fuse holder (101) and replace the

fuses (fuse type according to the technical data).

• Insert fuse holder (101) and attach mains plug (102).

• Close the cover (99) by applying the two screws (100) and plug the mains cable

into the mains.

Содержание BX 900





























Отзывы:

Нет отзывов