Haag-Streit BX 900 Скачать руководство пользователя страница 12 | Manualshive

Страница: 12 / 28

Haag-Streit BX 900 Скачать руководство пользователя страница 12

12

DEUTSCH

ENGLISH

FRANÇAIS

ITALIANO

ESPAÑOL

NEDERLANDS

PORTUGUÊS

SVENSKA

© HAAG‑STREIT AG, 3098 Koeniz, Switzerland ‑ HS‑Doc. no. 1500.7220449‑04090 – 2021 – 08

3.10 Background illumination

58. Background illumination (swiveling)

3.11 Power supply

NOTE!

• Observe the respective Haag-Streit instructions for use. For further

information, please contact your Haag-Streit representative.

• This device may only be operated with PS-LED and PS-LED HSM

901 power supplies from Haag-Streit.

4 Device assembly / installation

WARNING!

• Do not modify this device without authorization of the manufacturer.

Installation and repairs may only be performed by trained

specialists.

• Contact your Haag-Streit representative for installation, repairs and

modification work on the system. The contact details are available at

www.haag-streit.com.

• Only original Haag-Streit spare parts may be used.

59. Medically approved isolating

transformer

60. Mains

61. Instrument table

62. Camera power supply

63. Printer

64. Screen

65. Personal computer

66. Illumination control IC 01

67. PS-LED or PS-LED HSM 901

68. Flash unit FU 01

69. Optional power input (also

possible with battery operation)

70. Optional camera port (saving to a

card is also possible)

71. Galvanic isolation (EN 60601-1)

72. Headrest

73. Release key

74. LED illumination

75. Mirror and diaphragm component

76. Camera

77. Local network

The initial installation of the device is conducted by an authorized service technician.

The following adjustments can be conducted by the end user:

• Regulating the clearance of the slit width controls

• Attaching/removing a camera

• Adjusting the weight compensation

4.1 Instrument base with weight compensation facility

The weight of additional accessories mounted on the microscope can be

compensated using counterbalance springs. This keeps the height adjustment of the

slit lamp easy.

«
...
10
11
12
13
14
...
»

Содержание BX 900





























Отзывы:

Нет отзывов