H3C WA6630X, Руководство по установке

Страница: 33 / 34

4-1
4
Appendix B LEDs and Ports
LEDs
Table 4-1 LED descriptions
LED Status Description
Off
No power is present or the LED has been turned off
from the CLI.
Yellow
Steady on
The AP is initializing, or an initialization exception
has occurred.
Flashing at 1 Hz No radio cards have been detected.
Flashing at 2 Hz
The Ethernet interfaces are down and no mesh links
are established.
Green
Steady on
The AP has registered to an AC, but does not have
any associated clients.
Flashing at 0.5 Hz
The AP has started up but has not registered to any
AC.
Flashing at 1 Hz Only the 2.4G radio has associated clients.
Flashing at 2 Hz The AP is upgrading the image.
Blue Flashing at 1 Hz Only the 5G radio has associated clients.
Alternating between green and blue at
1 Hz Both the 2.4G and 5G radios have associated
clients.
Ports
The AP provides only one port. You can connect the all-in-one cable provided with the AP to it. The
all-in-one cable provides the following ports, with one port on each cable, in ascending order of the
cable length:
•
10GE/PoE++ port
•
GE1 port
•
GE2/PSE port
•
Console port
Table 4-2 Port descriptions
Port
Standards and
protocols
Description
10GE/PoE++
•
IEEE802.3
•
IEEE802.3u
•
IEEE 802.3ab
•
IEEE 802.3bz
•
IEEE 802.3an
•
IEEE802.3bt
Used for connecting the AP to an uplink device for
Internet or MAN access. It can also supply PoE
power to the downlink device.
It is represented by interface number XGE1/0/1 in
the MAP file and Ten-GigabitEthernet 1 for
configuration on the AC.