H3C WA6630X, Руководство по установке

Страница: 27 / 34

2-17
Figure 2-29 Dimensions of the installation holes on the AP base
Figure 2-30 Marking the installation holes on the wall
2. Drill four holes with a diameter of 8 mm (0.32 in) at the marked locations. Tap an expansion
bolt with a rubber hammer into each hole and then remove the nut and washers, as shown in
Figure 2-31 .

Keep the drill bit perpendicular to the wall and hold the drill handle tightly with both hands
when drilling holes.

In a sturdy and smooth wall, use a punch to create a hole to help locate the drill bit.

The depths of four holes must be the same.
Figure 2-31 Installing a screw anchor into the wall
3. Hang the AP on the screws, and then fasten the screws.