H3C UniServer BT716F, Руководство пользователя

Страница: 10 / 44

2-1
2
About the BT716F Straight-Through Module
Note
•
Hardware images shown in this manual are for illustration purposes only. The actual product may
vary.
•
The software UI may be updated from time to time. Please refer to the actual product UI.
•
ICMs supported by the chassis are classified into switching modules and straight-through modules
(also known as cascading modules in some manuals). The BT716F is a type of straight-through
module. The ICM and straight-through module in this document refer to the BT716F straight-through
module.
2.1 Product Overview
H3C UniServer BT716F is a 16G/32G FC straight-through module for the H3C UniServer B16000
blade enclosure. It provides an external data interface, which enables direct connection of parallel
cables to the FC Mezz NIC port of the blade server at the front of the chassis.
Note
Different from the switching module, the straight-through module supports only the transparent
transmission of data between the blade servers and the external network, but does not process the
data that pass through the straight-through module.
Figure 2-1 shows the appearance of the BT716F straight-through module.
Figure 2-1 Appearance of BT716F
2.2 Specifications
Table 2-1 describes the specifications of the straight-through module.
Table 2-1 Specifications
Category Item Description
Physical
specifications Dimensions
(H × W × D)
27 mm × 491.6 mm × 296.5 mm