82
Examples
# Configure that frame relay interface Serial 4/1/8:10 to operate in DTE mode, and set the value of
T391 parameter to 15 seconds.
<Sysname> system-view
[Sysname] interface Serial 4/1/8:10
[Sysname-Serial4/1/8:10] link-protocol fr
[Sysname-Serial4/1/8:10] fr interface-type dte
[Sysname-Serial4/1/8:10] timer hold 15
MFR configuration commands
display interface mfr
Syntax
display interface mfr
{
interface-number
|
interface-number
:
subnumber
} [
brief
] [
|
{
begin
|
exclude
|
include
}
regular-expression
]
display interface
[
mfr
] [
brief
[
down
] ] [
|
{
begin
|
exclude
|
include
}
regular-expression
]
View
Any view
Default level
1: Monitor level
Parameters
interface-number
: MFR interface number.
interface-number.subnumber
: MFR subinterface number, of which,
interface-number
is the main interface
number, and
subnumber
is the subinterface number. The
subnumber
argument ranges from 0 to 1023.
brief
: Displays brief interface information. If you do not specify this keyword, this command displays
detailed interface information.
down
: Displays information about interfaces in the DOWN state and the causes. If you do not specify
this keyword, this command displays information about interfaces in all states.
|
: Filters command output by specifying a regular expression. For more information about regular
expressions, see
Fundamentals Configuration Guide
.
begin
: Displays the first line that matches the specified regular expression and all lines that follow.
exclude
: Displays all lines that do not match the specified regular expression.
include
: Displays all lines that match the specified regular expression.
regular-expression
: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use the
display interface mfr
command to display the information about an MFR interface or an MFR
sub-interface, including configuration, state, and packet statistics.
If you do not specify the
mfr
keyword, this command displays information about all interfaces on the
current router.
