12
Examples
# Set the SDH overhead byte J0 of ATM interface ATM 3/1/1.
<Sysname> system-view
[Sysname] interface Atm 3/1/1
[Sysname-Atm3/1/1] flag j0 sdh ff
frame-format
Syntax
frame-format
{
sdh
|
sonet
}
undo frame-format
View
ATM main interface view
Default level
2: System level
Parameters
sdh
: Sets the framing format to SDH STM-1/STM-4.
sonet
: Sets the framing format to SONET OC-3/OC-12.
Description
Use the
frame-format
command to set the framing format for an ATM interface.
Use the
undo frame-format
command to restore the default.
By default, the framing format of an ATM interface is SDH STM-1/STM-4.
Examples
# Set the framing format of ATM 3/1/1 to SONET OC-3/OC-12.
<Sysname> system-view
[Sysname] interface Atm 3/1/1
[Sysname-Atm3/1/1] frame-format sonet
interface atm
Syntax
interface
atm
{
interface-number
|
interface-number.subnumber
[
p2mp
|
p2p
] }
undo interface atm
interface-number.subnumber
View
System view
Default level
2: System level
Parameters
interface-number
: ATM main interface number.
subnumber:
ATM subinterface number, in the range of 0 to 1023.
