93
[Sysname-Serial4/1/8:10] mfr retry 3
mfr timer ack
Syntax
mfr timer ack
seconds
undo mfr timer ack
View
Frame relay interface view
Default level
2: System level
Parameters
seconds
: Time (in seconds) of waiting for hello acknowledgment message before resending hello
message, in the range 1 to 10.
Description
Use the
mfr timer ack
command to set the time of waiting for hello acknowledgment message before
frame relay bundle link resends hello message.
Use the
undo mfr timer ack
command to restore the default.
By default, time of waiting for hello acknowledgment message before resending hello message is 4
seconds.
The bundle link sustains link status by periodically sending hello message to the peer end. If the times that
a bundle link resends hello message reach the maximum without receiving acknowledgement from the
peer, the system will regard the link protocol on the bundle link to be malfunctioning.
You can configure this command only after the
link-protocol fr mfr
command is used to associate a frame
relay bundle link interface with a frame relay bundle.
Related commands:
mfr timer hello
and
mfr retry
.
Examples
# Configure the frame relay bundle link Serial 4/1/8:10 to wait for six seconds before re-sending a hello
message.
<Sysname> system-view
[Sysname] interface Serial 4/1/8:10
[Sysname-Serial4/1/8:10] link-protocol fr MFR 4/1/6
[Sysname-Serial4/1/8:10] mfr timer ack 6
mfr timer hello
Syntax
mfr timer hello
seconds
undo mfr timer hello
View
Frame relay interface view
