54
Description
Use the
bundle min-active links
command to set the minimum number of selected interfaces required to
bring up the HDLC link bundle.
Use the
undo bundle min-active links
command to remove the limit.
By default, no limit is set on the minimum number of selected member interfaces required to bring up an
HDLC link bundle.
The value specified by using this command cannot be bigger than that specified using the
bundle
max-active links
command.
Related commands:
bundle max-active links
.
Examples
# Set the number of selected member interfaces required to bring up HDLC link bundle 1 to 5.
<Sysname> system-view
[Sysname] interface Hdlc-bundle 1
[Sysname-Hdlc-bundle1] bundle min-active links 5
default
Syntax
default
View
HDLC bundle interface view
Default level
2: System level
Parameters
None
Description
Use the
default
command to restore the default settings for an HDLC bundle interface.
This command might fail to restore the default settings for some commands for reasons such as command
dependencies and system restrictions. You can use the
display this
command in interface view to check
for these commands, and perform their
undo
forms or follow the command reference to individually
restore their default settings. If your restoration attempt still fails, follow the error message to resolve the
problem.
CAUTION:
The
default
command might interrupt ongoing network services. Make sure you are fully aware of the
impacts of this command when you perform it on a live network.
Examples
# Restore the default settings for HDLC link bundle interface 1.
<Sysname> system-view
[Sysname] interface Hdlc-bundle 1
[Sysname-Hdlc-bundle1] default
This command will restore the default settings. Continue? [Y/N]:y
