34
7.
Enter
0
to return to the BootWare Operation menu.
8.
Enter
0
in the BootWare Operation menu to return to the EXTEND-BOOTWARE menu.
9.
Enter
0
in the EXTEND-BOOTWARE menu to reboot the system.
Using FTP to upgrade BootWare through the management Ethernet port
1.
Enter
7
in the BootWare menu to access the BootWare Operation submenu.
=========================<BootWare Operation Menu>==========================
|Note:the operating device is sda0 |
|<1> Backup Full BootWare |
|<2> Restore Full BootWare |
|<3> Update BootWare By Serial |
|<4> Update BootWare By Ethernet |
|<0> Exit To Main Menu |
============================================================================
Enter your choice(0-4):
2.
Enter
4
in the BootWare Operation submenu to enter the Ethernet submenu.
===================<BOOTWARE OPERATION ETHERNET SUB-MENU>===================
|<1> Update Full BootWare |
|<2> Update Extended BootWare |
|<3> Update Basic BootWare |
|<4> Modify Ethernet Parameter |
|<0> Exit To Main Menu |
============================================================================
Enter your choice(0-4):
3.
Enter
4
in the Ethernet submenu to configure the network settings.
NOTE:
To use the existing setting for a field, press
Enter
without modifying the setting.
==========================<ETHERNET PARAMETER SET>==========================
|Note: '.' = Clear field. |
| '-' = Go to previous field. |
| Ctrl+D = Quit. |
============================================================================
Protocol (FTP or TFTP) :ftp
Load File Name :Main.btw
:
Target File Name :Main.btw
:
Server IP Address :192.168.0.2
Local IP Address :192.168.0.1
Subnet Mask :255.255.255.0
Gateway IP Address :0.0.0.0
FTP User Name :admin
FTP User Password :******
For more information about the fields, see
After you finish setting the FTP parameters, the system returns to the BOOTWARE
OPERATION ETHERNET submenu.
===================<BOOTWARE OPERATION ETHERNET SUB-MENU>===================