H3C SECPATH 5080F-CMW710-R9628P2414 Скачать руководство пользователя страница 36

Страница: 36 / 65

Enter

in the Ethernet submenu to upgrade the main or backup software images. For

example, enter

to upgrade the main software images.

Loading.....................................................................

............................................................................

.........................Done!

94786560 bytes downloaded!

Image file main-cmw710-boot-A9615.bin is self-decompressing...

Saving file sda0:/main-cmw710-boot-A9615.bin ......Done.

Image file main-cmw710-system-A9615.bin is self-decompressing...

Saving file sda0:/main-cmw710-system-A9615.bin .......................

............................................................................

..................Done.

==========================<Enter Ethernet SubMenu>==========================

|Note:the operating device is sda0 |

|<1> Download Image Program To SDRAM And Run |

|<2> Update Main Image File |

|<3> Update Backup Image File |

|<4> Download Files(*.*) |

|<5> Modify Ethernet Parameter |

|<0> Exit To Main Menu |

|<Ensure The Parameter Be Modified Before Downloading!> |

============================================================================

Enter your choice(0-5):

Enter

in the Ethernet submenu to return to the EXTEND-BOOTWARE menu.

Enter

in the EXTEND-BOOTWARE menu to run the new system software.

Upgrading the BootWare

You can upgrade the BootWare from the CLI or BootWare menus.

Upgrading the BootWare from the CLI

Whether a .btw file is compressed together with an .ipe file depends on the device model and
software release. Please check it with H3C technical support. This section describes only how to
upgrade the BootWare from the CLI.

To upgrade the BootWare from the CLI:

Use FTP or TFTP to download or upload the new BootWare image file to the root directory of
the storage medium on the device.

Execute the

bootrom update

command to upgrade the BootWare.

<System> bootrom update file cfa0:/main.btw slot 2

This command will update bootrom file, Continue? [Y/N]:y

Now updating bootrom, please wait...

Updating basic bootrom!

Update basic bootrom success!

Updating extended bootrom!

Содержание SECPATH 5080F-CMW710-R9628P2414


































































Результаты поиска

Содержание SECPATH 5080F-CMW710-R9628P2414

Отзывы:

H3C SECPATH 5080F-CMW710-R9628P2414, Руководство пользователя, Страница: 36 / 65

Результаты поиска

Содержание SECPATH 5080F-CMW710-R9628P2414

Отзывы: