27
Figure 2 Upgrade Immediately page
Upgrading system software from BootWare menus
To upgrade Comware images from BootWare menus, use one of the following methods:
Using TFTP to upgrade system software through the management Ethernet port
Using FTP to upgrade system software through the management Ethernet port
Preparing for the upgrade
1.
Connect the configuration terminal to the MPU's console port.
2.
Connect the MPU's management Ethernet port to the TFTP or FTP file server.
The TFTP or FTP server can be co-located with the configuration terminal (typically, a PC).
3.
Prepare the upgrade file:
If you are using TFTP, store the upgrade file on the TFTP server, and specify the directory.
If you are using FTP, store the upgrade file on the FTP server, and specify the directory, FTP
username, and password.
4.
Run the terminal emulation program on the configuration terminal.
5.
Power on the device, and then press
Ctrl+B
within 5 seconds at prompt to access the
EXTEND-BOOTWARE menu (see "
Using the EXTENDED-BOOTWARE menu
").
Using TFTP to upgrade system software through the management Ethernet port
1.
Enter
3
in the EXTEND-BOOTWARE menu to access the Ethernet submenu.
==========================<Enter Ethernet SubMenu>==========================
|Note:the operating device is sda0 |
|<1> Download Image Program To SDRAM And Run |
|<2> Update Main Image File |
|<3> Update Backup Image File |
|<4> Download Files(*.*) |
|<5> Modify Ethernet Parameter |
|<0> Exit To Main Menu |
|<Ensure The Parameter Be Modified Before Downloading!> |
