5-8
6) Restore the download rate to the default
Set the baud rate to 9600 bps (refer to
Change the rate of the serial port on the terminal
on page
5-5
for
detailed operation).
7) Restart the switch to make the updated Boot ROM file effective
Press
Enter
in the HyperTerminal window to return to the Boot ROM update menu.
BOOT MENU
1. Download application file to flash
2. Select application file to boot
3. Display all files in flash
4. Delete file from flash
5. Modify bootrom password
6. Enter bootrom upgrade menu
7. Skip current configuration file
8. Set bootrom password recovery
9. Set switch startup mode
0. Reboot
Enter your choice(0-9):
Enter
0
to restart the device. After that, the updated Boot ROM file becomes effective.
Loading host software
Select
1
in Boot Menu to load the host software of the switch. The system displays the following
information:
1. Set TFTP protocol parameter
2. Set FTP protocol parameter
3. Set XMODEM protocol parameter
0. Return to boot menu
Enter your choice(0-3):3
To load the host software through XMODEM, select
3
.
The procedure of loading an application file is similar to that of loading a Boot ROM file. The difference
lies in that you need to name the Load File name to write the application program to the flash memory
and specify the application file attribute after loading
Please input a new file name :update.bin
Free flash Space: 15598592 bytes
Writing flash...................................................................
................................................................................
................................................................................
................................................................................
................................................................................
................................................................................
.............................done!
