59
To do…
Use the command…
Remarks
Apply the
specified
AAA scheme
to the domain
authentication default
{
hwtacacs-scheme
hwtacacs-scheme-name
[
local
] |
local
|
none
|
radius-scheme
radius-scheme-name
[
local
] }
Return to
system view
quit
Create a local user and
enter local user view
local-user
user-name
Required
By default, no local user exists.
Set the authentication
password for the local user
password
{
cipher
|
simple
}
password
Required
Specifies the command
level of the local user
authorization-attribute level
level
Optional
By default, the command level is 0.
Specify the service type for
the local user
service-type
terminal
Required
By default, no service type is specified.
Configure common settings
for modem login
—
Optional
See “
Configuring common settings for
.”
After you enable command authorization or command accounting, you need to perform the following
configuration to make the function take effect:
•
Create a HWTACACS scheme, and specify the IP address of the authorization server and other
authorization parameters.
•
Reference the created HWTACACS scheme in the ISP domain.
For more information, see
Security Configuration Guide
.
When users adopt the scheme mode to log in to the device, the level of the commands that the users can
access depends on the user privilege level defined in the AAA scheme.
•
When the AAA scheme is local, the user privilege level is defined by the
authorization-attribute
level
level
command.
•
When the AAA scheme is RADIUS or HWTACACS, the user privilege level is configured on the
RADIUS or HWTACACS server.
For more information about AAA, RADIUS, and HWTACACS, see
Security Configuration Guide
.
After the configuration, when you log in to the device through modems, you are prompted to enter a
login username and password. A prompt such as <H3C> appears after you enter the password and
username and press
Enter
, as shown in
.
