143
# Verify whether the new system software image
soft-version2.bin
has been saved to the Flash of slave
switch 3.
<IRF> dir slot3#flash:/
Directory of slot3#flash:/
0 -rw- 6085 May 29 2010 11:38:45 config.cfg
1 -rw- 10518 Apr 26 2011 12:45:05 logfile.log
2 -rw- 19057904 Apr 26 2011 14:24:11 soft-version1.bin
3 -rw- 19077744 Apr 26 2011 14:13:46 soft-version2.bin
4 drw- - Apr 26 2011 12:00:33 seclog
5 -rw- 287 Apr 26 2011 12:19:52 system.xml
515712 KB total (479308 KB free)
The output shows that the new system software image has been saved to the Flash of slave switch 3.
5.
Save the current configuration.
<IRF> save
The current configuration will be written to the device. Are you sure? [Y/N]:y
Please input the file name(*.cfg)[flash:/config.cfg]
(To leave the existing filename unchanged, press the enter key):
flash:/config.cfg exists, overwrite? [Y/N]:y
Validating file. Please wait....
Saved the current configuration to mainboard device successfully.
Slot 2:
Save next configuration file successfully.
Slot 3:
Save next configuration file successfully.
Configuration is saved to device successfully.
The output shows that the current configuration has been saved to the configuration file of each IRF
member switch.
View the compatibility information between the new and current system software images
# Check whether the current and new system software images are compatible.
<IRF> display version comp-matrix file soft-version2.bin
The output varies with switches.
1.
If they are compatible, the following output is displayed:
Number of Matrices in Table = 1
Matrix for S5500-HI
Running Version: version1
Version Compatibility List:
version2 (Compatible)
The output shows that the new and current versions are fully compatible. You can use the compatible ISSU
upgrade method. For more information, see “
Performing compatible ISSU upgrade
.”
2.
If the two versions are incompatible, the following output is displayed:
Number of Matrices in Table = 1
Matrix for S5500-HI