Installing/Removing an ESM/VCPM Card
93
Figure 88
VPM structure
VPM Slot
Figure 89
Structure of VPM slot
Installing/Removing a
VPM
Follow the steps below to install a VPM:
Step 1: Make sure all power interfaces are shut down.
Step 2: Align the connecting fingers of the VPM with the VPM slot on the main
board.
Step 3: Insert the VPM in the direction of 45 degrees to the main board.
Step 4: Press the top edge of the VPM module perpendicularly to the main board
until the VPM snaps into the slot. At this time, the VPM forms a certain angle to
the main board.
Figure 90
Press the VPM into the slot and pull the VPM until it is locked
The removal procedure is just opposite.
Installing/Removing
an ESM/VCPM Card
Follow the steps below to install an ESM/VCPM card:
Step 1: Make sure all power interfaces are shut down.
Step 2: Open the chassis cover. (For detailed operations, refer to “Opening/Closing
the Chassis Cover” on page 79).
Содержание MSR 30-16
Страница 4: ...4 GET THE LATEST DOCUMENTATION AND SOFTWARE FOR YOUR H3C ROUTER...
Страница 54: ...54 CHAPTER 4 STARTUP AND CONFIGURATION...
Страница 78: ...78 CHAPTER 5 SOFTWARE MAINTENANCE...