H3C MSR 30-16, Руководство по установке

Страница: 92 / 97

92 C
HAPTER
6: H
ARDWARE
M
AINTENANCE
Step 3: Insert the memory module into the slot in the direction of 90 degrees to
the main board.
Step 4: Press the edge of the memory module vertically down until you hear a
click.
Step 5: Check that the ejector clips have locked the memory module.
Figure 86 Install a memory module
Follow the steps below to remove a memory module:
Step 1: Make sure all power interfaces are shut down.
Step 2: Press the ejector clips on the two sides of the memory module, and pull
the memory module outwards horizontally until it separates from the ejector clips
and forms an angle of 45 degrees to the main board.
Step 3: Remove the memory module.
Figure 87 Remove a memory module
Replacing a VPM
n
The VPM on the MSR 30-11 is irreplaceable.
VPM Structure