H3C MSR 30-16, Руководство по установке

Страница: 91 / 97

Replacing a Memory Module 91
Figure 84 Install a memory module
Follow the steps below to remove a memory module:
Step 1: Make sure all power interfaces are shut down.
Step 2: Press the ejector clips on the two sides of the memory module, and pull
the memory module outwards horizontally until it separates from the ejector clips
and forms an angle of 45 degrees to the main board.
Step 3: Remove the memory module.
Figure 85 Remove a memory module
Installing/removing a memory module on/from the other modules
Follow the steps below to install a memory module:
Step 1: Make sure all power interfaces are shut down.
Step 2: Align the connecting fingers of the memory module with the slot on the
main board.