H3C MSR 20-20 Скачать руководство пользователя страница 29 | Manualshive

Страница: 29 / 73

background image

Fixed Interfaces

29

devices, such as PC to PC or PC to router. You can make crossover cables
yourself as needed.

n

In making network cables, shielded cables are preferred for electromagnetic
compatibility sake.

Connecting the Ethernet cable

Follow the steps below to connect an Ethernet cable:

Step 1: Connect one end of the Ethernet cable to an Ethernet port on the router
and the other end to another device.

■

For a 10/100 Mbps port provided by the RPU, connect it to a PC or another
router using a crossover cable or to a Hub or LAN switch using a
straight-through cable.

Step 2: View the LINK LED of the Ethernet interface: ON means a link is present.

Connecting AUX to a

Modem

AUX port

AUX is an RS232 asynchronous serial interface, which can back up a WAN
interface and provide dial connection. In case of console failure, AUX can function
as a console interface.

AUX cable

AUX cable is an eight-wire shielded cable. At one end of the cable is an RJ-45
connector for connecting the console port on the router. At the other end are
DB-9 (male) connector and DB-25 (male) connector. You can plug either of them
into the serial port on a modem as needed.

Figure 15

AUX cable

Connecting the AUX cable

Follow these steps to connect the AUX cable.

Step 1: Plug the RJ-45 connector of the cable into the AUX port on the main
board.

Step 2: Plug the DB-25 or DB-9 connector into the serial port on the analog
modem.

When using the AUX interface for remote configuration or dial backup, you need
to connect the local modem to the remote modem through PSTN and then to the

«
...
27
28
29
30
31
...
»

Содержание MSR 20-20










































































Отзывы:

Нет отзывов

Похожие инструкции для MSR 20-20

Бренд: Magnadyne Страницы: 13

Бренд: Zhone Страницы: 7

Бренд: Zhone Страницы: 1

Бренд: Juniper Страницы: 502

Бренд: Conceptronic Страницы: 230

Бренд: E-TOP Страницы: 24

Бренд: Intellinet Страницы: 12

Бренд: Lucent Technologies Страницы: 20

Бренд: QUNDIS Страницы: 42

JetStor NAS 724UX

Бренд: AC&NC Страницы: 117

JetFusion 2100 Series

Бренд: Paradyne Страницы: 296

Бренд: ZyXEL Communications Страницы: 30

XC-16CH-NVR-4TB

Бренд: Xyclop Страницы: 19

Бренд: Patton electronics Страницы: 8

Бренд: LevelOne Страницы: 49

DynaGST/2402G GEP-33224T-1

Бренд: UNICOM Страницы: 17

Бренд: IEI Technology Страницы: 106

Бренд: Allied Telesis Страницы: 44

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды