H3C MSR 20-20, Руководство по установке

Страница: 34 / 73

34 C
HAPTER
4: S
TARTUP AND
C
ONFIGURATION
shown in the following figure. Note that the selected serial interface should be
consistent with the actual serial interface connected by the console cable.
Figure 22 Setting the connection port in the local configuration
2 Setting terminal parameters. As shown in the following figure, in the properties
dialog box of the serial interface, set the baud rate to 9600, data bit to 8, no parity
check, stop bit to 1, and flow control to none. Then, click <OK> to return to the
HyperTerminal window.
Figure 23 Setting serial interface parameters
3 Set HyperTerminal properties. Select [FilePropertiesSettings] in the HyperTerminal
to enter the properties setting window as shown in the following figure. Select the