H3C H3C S3600 Series, Руководство по управлению

Страница: 873 / 1277

1-2
Port peak power :552 mW
Port average power :547 mW
Port current :10 mA
Port voltage :51 V
Table 1-1 display poe interface command output description
Field Description
Port power enabled PoE is enabled on the port
Port power ON/OFF The power on the port is on/off
Port power status
PoE status on the port:
z
user command set port to off: PoE to the port is turned off by the
user
z
Standard PD was detected: A standard PD is detected
z
detection is in process: PDs are being detected
Port power mode
PoE mode on the port:
signal: PoE through the signal cable
Port PD class Class of power to the PD
Port power priority
PoE priority of the port:
z
critical: The highest
z
high: High
z
low: Low
Port max power The maximum available power on the port
Port current power The current power on the port
Port average power The average power on the port
Port peak power The peak power on the port
Port current The current on the port
Port voltage The voltage on the port
# Display the PoE status of all ports.
<Sysname> display poe interface
PORT INDEX POWER ENABLE MODE PRIORITY STATUS
Ethernet1/0/1 on enable signal low Standard PD was detected
Ethernet1/0/2 on enable signal low Standard PD was detected
Ethernet1/0/3 off enable signal low detection is in process
Ethernet1/0/4 off enable signal low detection is in process
Ethernet1/0/5 off enable signal low detection is in process
Ethernet1/0/6 off enable signal low detection is in process
Ethernet1/0/7 off enable signal low detection is in process
Ethernet1/0/8 on enable signal critical Standard PD was detected
……
<Omitted>