manualshive.com logo in svg

H3C H3C S3600 Series, Руководство по управлению, Страница: 1158 / 1277

Поделиться
Скачать
H3C H3C S3600 Series Скачать руководство пользователя страница 1158

 

1-21 

For ICMP tests, use the 

undo source-interface

 command to remove the specified source interface, 

and its corresponding IP address is no longer used as the source IP address of ICMP requests. For 

DHCP tests, use the 

undo source-interface

 command to remove the specified interface for DHCP 

probes.  

By default, no source interface is specified for ICMP tests and no interface is configured for DHCP 

probes.  

 

 

z

 

For DHCP tests, this command is required. For ICMP tests, this command is optional. This 

command does not apply to other tests. 

z

 

For ICMP tests, if a source IP address has been configured with the 

source-ip

 command, the 

source-interface

 command cannot change the configured IP address. 

z

 

For an ICMP test, if a source interface has been configured with the

 source-interface

 command, 

the test destination address should be configured as the address of the device directly connected 

to the interface. Otherwise, the test will fail. 

z

 

The interface to be specified in this command can be only a VLAN interface. 

z

 

The interface to be specified must be Up; otherwise the test will fail.  

 

Examples 

# Configure the source interface that sends test packets in DHCP tests as VLAN-interface 1.  

<Sysname> system-view 

System View: return to User View with Ctrl+Z 

[Sysname] hwping administrator dhcp 

[Sysname-hwping-administrator-dhcp] test-type dhcp 

[Sysname-hwping-administrator-dhcp] source-interface Vlan-interface 1 

source-ip 

Syntax 

source-ip ip-address 

undo source-ip 

View 

HWPing test group view 

Parameters 

ip-address

: Source IP address for a test.  

Description 

Use the 

source-ip 

command to configure the source IP address for the test.  

Use the 

undo source-ip

 command to remove the configured source IP address.  

Содержание H3C S3600 Series






























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов