H3C H3C S3600 Series, Руководство по управлению, Страница: 546 / 1277

1-29
z
After configuring the
accounting-on enable
command, you need to execute the
save
command
so that the command can take effect when the switch restarts.
z
This function requires the cooperation of the H3C CAMS system.
Related commands:
nas-ip
.
Examples
# Enable the user re-authentication at restart function for the RADIUS scheme named radius1.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] radius scheme radius1
[Sysname-radius-radius1] accounting-on enable
calling-station-id mode
Syntax
calling-station-id mode
{
mode1 | mode2
} {
lowercase | uppercase
}
undo calling-station-id mode
View
RADIUS scheme view
Parameters
mode1
: Sets the MAC address format to XXXX-XXXX-XXXX, where each X represents a hexadecimal
number.
mode2
: Sets the MAC address format to XX-XX-XX-XX-XX-XX.
lowercase
: Uses lowercase letters in the MAC address.
uppercase
: Uses uppercase letters in the MAC address.
Description
Use the
calling-station-id mode
command to configure the MAC address format of the
Calling-Station-Id (Type 31) field in RADIUS packets.
Use the
undo calling-station-id mode
command to restore the default format.
By default, the MAC address format is XXXX-XXXX-XXXX, in lowercase.
Examples
# Set the MAC address format of the Calling-Station-Id field to
XX-XX-XX-XX-XX-XX
, in uppercase.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname]radius scheme system
[Sysname-radius-system]calling-station-id mode mode2 uppercase