H3C CR19000-20, Руководство по установке

Страница: 86 / 139

7-1
7
Accessing the router
The first time you access a router you must log in through the console port.
Using a console cable to connect the router to a
configuration terminal
Setting up the configuration environment
IMPORTANT:
When you connect a PC to a powered-on router, first connect the DB-9 connector of the console
cable to the PC, and then connect the RJ-45 connector to the router.
To connect a configuration terminal to the router by using a console cable:
1. Select a configuration terminal, which can be a character terminal with an RS-232 serial port, or
a PC.
2. Plug the DB-9 female connector of the console cable into the serial port on the configuration
terminal and the RJ-45 connector into the console port on the router.
Setting terminal parameters
To configure and manage the router through the console port, you must run a terminal emulator
program, TeraTermPro or PuTTY, on your configuration terminal. You can use the emulator program
to connect a network device, a Telnet site, or an SSH site. For more information about the terminal
emulator programs, see the user guides for these programs.
Start the terminal emulator program and configure the parameters as follows:
•
Bits per second —9600.
•
Data bits —8.
•
Stop bits —1.
•
Parity —None.
•
Flow control —None.
Starting the router
WARNING!
Locate the power switch of the power supply system before power on the router so you can quickly
shut power off when an electrical accident occurs.
IMPORTANT:
The router has two switches. As a best practice, turn on the two switches simultaneously to power
on the router.