H3C CR19000-16, Руководство по установке

Страница: 24 / 146

2-3
Rack-mounting the router
CAUTION:
The router is heavy. For rack stability, install it at a lowest possible position.
Attaching slide rails to the rack
To rack-mount the router, select and attach slide rails to the rack. See Table2-1 for the slide rail
requirements.
Table2-1 Slide rail requirements
Router model
Max. chassis
weight (fully
configured)
Applicable slide rails
Slide rail model Adjustment range
Occupied
space
CR19000-16 350 kg (771.60 lb) LSXM1BSR
630 mm to 900 mm
(24.80 in to 35.43 in)
1 RU
For information about installing slide rails, see H3C LSXM1BSR 1U Bottom-Support Rails
Installation Guide (available also at
https://www.h3c.com/en/Support/Resource_Center/EN/Routers/Catalog/CR19000/CR19000/ ).
When installing slide rails, make sure the load-bearing plane of the slide rails is perpendicular to the
four rack posts.
Mounting the router in a rack
CAUTION:
When you move the router to a low temperature environment from a high temperature environment,
condensation might occur. Before installing the router, dry the router to prevent the internal
components from being damaged because of short circuit.
To mount the router in a rack:
1. As shown in Figure2-3 , mark the cage nut installation holes on the front rack post.