H3C CR16000-F, Руководство по установке

Страница: 72 / 105

11

If the LED is on, you cannot remove the CF card. You must use the umount command in
user view to unmount the CF card and wait until the CF card LED is off. If you want to
continue to use the CF card, execute the
mount
command in user view to mount the CF
card again.
For more information about the
umount
and
mount
commands, see file system
management in H3C CR16000-F Routers Fundamentals Command Reference .

If the LED is flashing, data is being read from or written to the CF card. Only after the LED
stops flashing, you can remove the CF card.

If the LED is off, the CF card is unmounted. You can remove the CF card.
2. Use a Phillips screwdriver to loosen the screw at the right side of the CF card protection cover,
and open the CF card protection cover.
Skip this step if the MPU does not have a CF card protection cover.
3. Push the eject button on the CF card slot all the way until the CF card in the slot ejects. Remove
the CF card from the slot, and put the removed CF card on an antistatic bag or into its original
package.
4. Before inserting the CF card, make sure the CF card eject button is pushed to the end and does
not reset automatically. Push the new CF card all the way into the CF card slot until the eject
button resets.
5. Close the CF card cover and use a Phillips screwdriver to fasten the screw on the CF card
protection cover.
Skip this step if the MPU does not have a CF card protection cover.
Figure 14 Replacing a CF card
1
2
3
4
5
6