appendix
file: n:\article\cos14310m5-v1_08hpc-en\20150130_cos14310m5-v1.08hpc-en_instructions_for_use_h-p-cosmos_treadmill.doc
© 2015 h/p/cosmos sports & medical gmbh author: fh [email protected] created 30.01.2015 printed 30.01.2015 page: 204 of 216
15.2
Instruction protocol, checklist
Once the installation of the running machine has been completed, the h/p/cosmos employee or h/p/cosmos partner starts
commissioning of the device and instruction of the user. It is important to include all people in the instruction and
commissioning who are going to work with the running machine. After the instruction is completed, the instruction protocol is
to be signed by the h/p/cosmos technician and all trained persons. Signed instruction protocol, signed delivery note and the
registration form are to be sent to h/p/cosmos.
Instruction on general operation
1.
Hand over operating manual.
Inform about operating and service manual (always keep one within
reach of all users).
2.
Refer to safety notes, warnings and
precautions in this manual. Place the print-out
of the safety instructions (DIN A4 form in the
delivery folder) close to the treadmill.
Children are not allowed near the treadmill. On the treadmill
children are to be secured by a safety arch with chest belt
system. For “higher-risk applications” or where a fall would lead
to unacceptable risks, a safety arch with chest belt system and
fall stop prevention has to be used.
3.
In particular point out the necessary safety zone.
Keep a safety zone of at least 2 m in length and the treadmills width
behind the running machine and 1 x 1 m in front of the running
machine. In case of reverse belt rotation, the frontal safety zone should
be same size as the rear.
See chapter 5.1 entitled “Operation, General”.
accomplished
accomplished
