ELECTRO FREEZE Soft Serve Model GEN-2080
185240
13
4 Part Names and Functions
The following descriptions apply to figure 4-3. The number preceding the part
name corresponds to the number in the figure.
12.) HOSE - TRANSFER RED:
Special
“red-lined” hose that is squeezed by
rollers to transfer mix to freezer.
13.) TUBE-ASSEMBLY MIX INLET:
C
arries mix from mix container to
MTS.
14.) DUCKBILL:
A rubber check valve
that prevents mix from falling back
into the mix container.
15.) PORT - AIR/MIX:
Blends air and
mix as it flows into the transfer
hose.
16.) CLIP - TUBE RETAINER:
Locks
mix pickup tube into air/mix port.
17.) O-RING:
Seals the mix tube in the
air/mix port.
1.)
SUPPORT-ROLLER BEARING:
Holds roller assembly in place.
2.)
SHOE-ROLLER:
Provides an
opening to insert the mix transfer
hose. Squeezes transfer hose
against rollers.
3.)
ROLLER ASSEMBLY COMPLETE:
Squeezes mix/air through tubing to
freezing cylinder.
4.)
KNOB-HAND:
Locks roller shoe in
position.
5.)
CLAMP-SHOE:
Swings hand knob
into position over roller shoe.
6.)
RETAINER-AIR TUBE:
Holds air
meter tube in the “up” position.
7.)
AIR METER:
Regulates the amount
of air being drawn into the system.
8.)
TUBE-AIR:
Provides connection for
the air meter.
9.)
CLAMP - ASSY. SOFT HOSE 5/8”:
Prevents mating parts from leaking.
10.) HOSE - ASSY. MIX BRAIDED:
Connecting tube between the Mix
Transfer System and the cylinder
inlet.
11.) COVER - MTS:
Protection against
moving parts. Cover must be in
place for the MTS to operate.
