ELECTRO FREEZE Soft Serve Model GEN-2080
28
185240
11. Remove MTS hose assemblies
from the Mix Transfer Systems as
follows (figure 8-5):
a. remove cover,
b. loosen the hand knob,
c. swing back the shoe clamp,
d. swing open the roller shoe,
e. loosen the clamp on braided
hose,
f. pull tube off cylinder inlet and
slide hose assembly out of
roller support housing.
12. Disassemble the MTS hose
assembly as shown in figure 8-6.
Figure 8-6 MTS Hose Assembly
Figure 8-5 MTS
8.2 Disassembly Instructions
— Soft Serve
(continued)
