- 68 -
To select the DVR to control, please click on the button as circled in the above diagram to set the
corresponding DVR ID. Please note that the
RS-232/422/485 setup (Section 6.9)
, including the
DVR
ID
, in the DVRs must be configured correctly (
Model
must be set as
Control Protocol
). Please use
the buttons
MAIN-AUX ON
,
MAIN-AUX OFF
,
CALL-AUX ON
,
CALL-AUX OFF
to switch on/off
the output of the controlled DVR.
Note:
UP-LEFT
,
UP-RIGHT
,
DOWN-LEFT
, and
DOWN-RIGHT
are newly added to control the
PTZ cameras diagonally.
M4V/H.264 to AVI Conversion Utility
To run the
M4V/H.264 to AVI Conversion Utility
under MS-Windows, please select
Start->Programs->Hyper Electronics Mappers->M4V2AVI or double-click on the file
AVI_Converter.EXE
, and the screen will be shown as below.
Please select the source files –
.M4V/.H264
files archived from DVR, remote I.E., HEM, and select the
target directory to save the converted files, and then click on
OK
to do the conversion. The
converted
.AVI
files can be played by
Windows Media Player
if
DivX
or the other MPEG-4 decoder
(for .M4V) or H.264 decoder (for .H264) is installed in the PC.
SCW-7704 User Manual
SCW-7704 User Manual