- 18 -
(6) Backup state – Backup icon shown for backup,
(7) SEQ display ON/OFF or playback state – SEQ icon shown for SEQ display ON, other icons for
different playback states.
4.1 Text Input (
Please match with a remote control usage
)
There are certain circumstances that the system requires the user to enter text, such as system login,
camera title setup, and so on. Please follow the steps below to enter text:
(1) Press
ENTER
to edit the highlighted option. The flashing cursor will be shown to indicate the
editing point. Besides, a
keypad hint
will be shown as below.
(2) Press
◄►
to move the cursor to the left/right.
(3) Press
code
in text editing mode to change text case. (If this entry can accept number only,
pressing
code
will have no effects.) Indicators on the screen show the current setting:
123
= Number only
abc
= No capital letters
ABC
= All capital letters
CODE
= Internal code for the selected language, such as Chinese, Japanese, etc.
(4) Press a number key (
1-9, 0
)
repeatedly until the character you want appears. (
1
for 1 or space,
2
for 2, a/A, b/B, or c/C,
for 5, j/J, k/K, l/L
,
MUTE
for 6, m/M, n/N, o/O
, the others as
shown on the
keypad hint
) If internal
CODE
is selected, a
CODE
line
will be added (after
the first code is entered) for each new code to be entered. Please check the internal code table
for the selected language. For 2-byte code, e.g. Chinese or Japanese, the code accepted is
from 0000 - FFFF.
(5) Press
mark
to bring up a list of punctuation marks and special characters. The highlighted
character in the list shows the selected one. Press
▲
▼◄►
to change the selection.
(6) If you make a mistake, press
BS
to remove the character to the left of the cursor, or press
DEL
to delete the character at the current cursor position.
(7) In text editing mode, internal code box, and mark list, press
ENTER
to exit and save changes,
press
ESC
to exit without making changes.
SCW-7704 User Manual
SCW-7704 User Manual