- 40 -
Following is a brief description for each item and its specific operations:
Start
– the start time of this time segment, increment at 30 minutes. (The end time of this time
segment is implicitly set as the start time of next time segment, or the start time of the first time
segment of the same weekday if it’s the last one.) Press
+/-
buttons to select the desired start
time.
Example: If the user sets the start time of T1/MON as 9:00, T2/MON as 18:00, T3-T16/MON
as N/A (Not Available), then T1/MON is 9:00-18:00, T2/MON is 0:00-9:00, and
18:00-24:00.
Alarm
– record mode (No, Video, or Audio/Video) when certain alarm input is triggered.
Press
+/-
buttons to change the value.
Motion
– record mode (No, Video, or Audio/Video) when motion is detected for certain camera.
Press
+/-
buttons to change the value.
Normal
– normal record mode, including No, V (Video only), or A/V (Audio/Video). Press
+/-
buttons to change the value.
6.6 HDD Setup
In Setup Menu display, press
▲▼
to change the highlighted option to
HDD
, and then press
ENTER
to call up HDD Setup as shown.
In the surveillance applications, alarm video/audio is much more important than normal
video/audio. So, this digital video/audio recorder is designed to allow the user to divide each
HDD into alarm partition and normal partition. And, alarm video/audio will be recorded in alarm
partition, normal video/audio in normal partition.
The HDD Setup allows the administrator to format/clear each HDD, set Alarm Record size and
Normal Record size of each HDD, and define the behaviors for Alarm Record and Normal Record
if it reaches the end of the last HDD in the system.
SCW-7704 User Manual
SCW-7704 User Manual