- 51 -
WAP Picture qulity
(if this machine support cellular phone long range
interview)Please press+/- The key changes initial value
.
Note: If the Control Port or Data Port is not available or accessible during remote access, the
system will reset the ports to their default values, i.e. 67/68.
7. PTZ Control
The digital video/audio recorder supports a variety of PTZ cameras. The user can easily control
the PTZ cameras through the operations described in this Chapter if those PTZ cameras have been
connected and setup correctly. Please refer to
Section 3.2 Optional Connections
for the
connections. Please refer to
Section 6.1 Pre-Camera Setup
to set the PTZ ID of each PTZ camera,
and
Section 6.9 RS-232/422/485 Setup
to setup the control port.
If a camera is also a PTZ camera, there will be an asterisk (*) preceding its title in its video window
in split-window display. Please press
PTZ
button to enter PTZ control mode if the focus camera
is a PTZ camera. The
asterisk
(*) will be
blinked
to indicate that the camera is now in PTZ
control mode.
In PTZ control mode, the user’s operations can be divided into general operations and
miscellaneous function specific operations, and are described as the followings:
General operations:
PTZ
Press this button to exit PTZ control mode. The asterisk (*) will be changed back to normal
color.
▲
▼
Press these buttons to tilt the camera up/down.
◄►
Press these buttons to pan the camera left/right.
ZOOM (
) +/-
Press these buttons to zoom in/out the camera.
GOTO
Press this button to move the camera to the preset position. The
keypad hint
will be shown.
Press numeric buttons
0-9
to enter the number of the preset position to move the camera to.
The range of the preset positions is 00-99.
SCW-7704 User Manual
SCW-7704 User Manual