Gyyr TLC2100SHD, Руководство по эксплуатации

Страница: 65 / 78

TLC2100SHD Operating Instructions
Document 900.0060 Rev 1.01
51
B
Remote Control Feature
The Remote Control Feature permits control of the unit from a remote wired location.
This is accomplished by wiring contacts 13 and 15 on the 15-pin D connector on the
rear of the recorder to a switch/resistor network, see
Figure B-1 . The following functions
can be activated by using the remote pins: STOP, PLAY, STILL, REWIND, FIELD
FORWARD, FAST FORWARD, SPEED CHANGE, and RECORD.
Figure B-1 Resistor Network
• Not active in LOCK mode
• The Resistor Network is supplied as service part, Number F1372561
• Remote Control may also be activated using standard resistors in place of the
Resistor Network, see
Figure B-2 :
Figure B-2 Standard Resistors
1 2 3 4 5 6 7 8
1 5
1 3
GND REMOTE
IN
STOP PLAY STILL REW FIELD F.F. MODE REC
FWD UP
1.5k 3.3k 6.2k 1 0 k 15k
33k 68k
1 2 3 4 5 6 7 8