Gyyr TLC2100SHD, Руководство по эксплуатации

Страница: 57 / 78

TLC2100SHD Operating Instructions
Document 900.0060 Rev 1.01 41
The following set of commands is for HD Tape Speeds:
Notice that the command characters are the same in both sets of commands, but the
controlling factor is whether the VCR is operating in Normal or HD mode. If you are in
Normal mode and wish to send HD speed commands, you must first switch from the
Normal mode to the HD mode (or vice-versa).
For example: If the VCR is in 2-hr. speed (Normal mode) and you wish to switch to
6-hr. speed (HD mode), you would have to follow these steps: 1) put VCR in STOP
mode, 2) switch to HD mode and, 3) switch to 6 hr. mode. Therefore, you would need
to send the following commands in this order: A+5, A+P,
S+@.
Note You can only switch between normal and HD modes when the VCR is in
STOP mode.
C S + @ 06 Hour
C S + B 30 Hour
C S + C 48 Hour
C S + D 72 Hour
C S + E 120 Hour
C S + F 175 Hour
C S + G 240 Hour
C S + H 360 Hour
C S + I 480 Hour
C S + J 600 Hour
C S + K 720 Hour
C S + L 960 Hour
C S + M 00 Hour
C S + N A18 Hour
C S + O A30 Hour
Notes
The 00 hour (one-shot)
speed will work for all
operating modes except
PLAY mode.
The A24/30 hour speed
command will work for all
operating modes except
RECORD mode.
The A12/A18 hour speed
commands work for all
modes. The VCR can
determine if it is audio or
not, based on the
operating mode.